THINKWARE DASH CAM F800PRO

Description

Super Night Vision 2.0 in Continuous Recording Mode:

1080p Full HD & Full HD 2CH* / Super Night Vision 2.0 / Time Lapse
Safety Camera Alert / Road Safety Warning System (LDWS, FCWS, uFCWS, FVDW)
140° Wide Angle (Front & Rear*) / Advanced Video Clear Technology / Built-in Wi-Fi / Built-in GPS
Format Free 2.0 / Mobile APP (Android/iOS) / Windows/Mac Viewer​

*Rear Camera Sold Separately (F800PRA)VARIOUS AUTONOMOUS RECORDING MODES

Automatically Switching Recording Modes

Get in and go without having to worry about if your Thinkware Dash Cam is recording.
Thinkware Dash Cam’s automatically switch recording modes depending on the vehicle is doing.

Continuous Recording Mode

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Incident Recording Mode

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Manual Recording Mode

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

Energy Saving Parking Mode

The dash cam will go to sleep and soon after an impact has been detection by built-in G-sensor, F800 PRO will wake up within a second and start recording for next 20 seconds.

Note: Parking Mode requires the use of the Hard Wiring Cable (HWC)

ENERGY SAVING PARKING RECORDING

Energy saving parking recording will reduce power consumption by 1/3 and gives 3x longer video recording than normal parking mode.

When you are away for a vacation or leaving your car for a long period of time, energy saving parking recording is the recommended solution.

When in use, F800PRO will go to sleep and if an impact is detected by the built-in G-senor, F800 PRO will wake up within a second and start recording for next 20 seconds.

Note: Parking mode requires use of the Hard Wiring Cable (HWC)